The pyropak is a high efficiency wood stove among the smallest on the market. This pedestal model is epa certified. The pyropak is ideal for small areas that require a limited heating capacity without compromise on the appliance efficiency.This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the recommended heating area, firebox volume, maximum burn time and maximum heat output The maximum heat output (dry cordwood) is based on a loading density varying between 15 lb ft³ and 20 lb ft³ Other performances are based on a fuel load prescribed by the standard The specified loading density varies between 7 lb ft³ and 12 lb ft³ The moisture content is between 19% and 25% As measured per csa b4151-10 stack loss method Higher heating value of the fuel Lower heating value of the fuel Performances based on a fuel load prescribed by the standard at 7 lb ft³ and with a moisture content between 19% and 25% Optimum overall efficiency at a specific burn rate (lhv) Carbon monoxyde Limited lifetime warrantyApproved for a Mobile Home Installation: No Average CO: 130.5 g h Average Overall Efficiency (EPA cribs Douglas fir): 68.0 % (HHV) (5) 73.5 % (LHV) (6) Average Particulate Emissions Rate: 4.0 g h Baffle Type: Stainless Steel Canadian Standard (Emissions): CSA B415.1-10 Canadian Standard (Safety): ULC S627 Centre Line of Flue Outlet to The Back: 5-1 2 Centre Line of Flue Outlet to The Side: 11-3 8 Collection: Pyropak Depth: 21-7 8 Door Opening Height: 7-5 8 Door Opening Width: 15 Door Type: Single, Glass with Cast Iron Frame Firebox Depth: 12-1 2 Firebox Height: 9-5 8 Firebox Volume: 1.3 Firebox Width: 18-3 8 Flue Outlet Diameter: 6 Fuel Type: Dry Cordwood Glass Surface: 13-5 8W x 7-5 8H Glass type: Ceramic Glass Heat Output Rate (min. to max.): 10,800 BTU h (3.2 kW) to 22,600 BTU h (6.6 kW) Height: 27-3 8 Log Positioning: Over Width Maximum Burn Time: 5h Maximum Heat Output (Dry Cordwood): 40,000 BTU h (11.7 kW) Maximum Log Length: 17 Minimum Chimney Hei
